Sites

Approved contributions by @equipmentparts2 to the Viesearch index.

Site icon
S275 Edlund Can Opener Spring S-11/U-12

The Edlund S275 can opener spring is a mechanical component listed for S-11 and U-12 can opener models. Spring tension supports the movement of connected parts within the opener’s mechanism, according to its assembly design. Selecting the correct…

Site icon
6150201 Delfield Extension Spring

The Delfield 6150201 extension spring is a mechanical component intended for a specified equipment assembly. Extension springs generate tension when stretched, allowing connected parts to move or return according to the assembly’s design. Correct…

Site icon
5700-003-32-85 Jackson Dishmachine Door Spring Avenger Series

The Jackson 5700-003-32-85 dishmachine door spring is specified for equipment in the Avenger Series. This mechanical component provides spring tension to support the door assembly’s movement and positioning during normal use. Its correct…

Site icon
3043300 Garland Griddle Spring Retainer

The Garland 3043300 griddle spring retainer is a mechanical component associated with the spring assembly in designated griddle equipment. A retainer typically keeps a spring positioned within its intended mounting arrangement, supporting the…

Site icon
Groen 160649 Commercial Steamer Relay Control Board

The Groen 160649 boilerless steamer relay board provides electrical switching within the steamer’s control system. Relays on the board allow designated electrical loads to be switched in response to control signals, according to the equipment’s…

Site icon
5N-22618 Star Mfg Oven Pre-Filter Hood Universal

The Star Mfg 5N-22618 universal oven hood pre-filter measures 16" x 20" x 2" and fits designated ventilation filter applications. Positioned ahead of the primary filtration stage, a pre-filter captures larger airborne particles before they reach…

Site icon
921092 TRUE Rocker Switch

The TRUE 921092 rocker switch provides a manual switching point within the electrical circuit of designated equipment. Its rocking actuator changes the switch position, allowing the connected circuit to be turned on or off according to the…

Site icon
ELSWT610BE Randell Rocker Switch Red Lighted DPST

The Randell ELSWT610BE red lighted rocker switch provides a manually operated switching point for electrical circuits in compatible commercial foodservice equipment. Its double-pole, single-throw (DPST) configuration switches two circuit paths…

Site icon
007861-45 T&S Brass Pre-Rinse Spray Valve Rubber Bumper

The T&S Brass 007861-45 gray rubber bumper fits the specified B-0107 spray valve assembly. This component provides a cushioning contact point within the assembly, helping protect the mating area from direct impact during normal use. Its shape and…

Site icon
707142 Champion Dishwasher Rotor Assembly

The Champion 707142 dishwasher rotor assembly is a mechanical component intended for a specified dishwashing machine assembly. Its rotating action supports the operation of the mechanism in which it is installed, depending on the equipment design…

Site icon
21880434 Bakers Pride Oven Radiant Stainless Steel 16-Gauge

The Bakers Pride 21880434 oven radiant is a stainless steel component measuring 22-1/2" x 3-3/8" x 1-3/8", fabricated from 16-gauge material. In a compatible oven assembly, the radiant receives and transfers heat within the cooking area, supporting…

Site icon
3978272 Delfield Freezer Wire Shelf

The Delfield 3978272 freezer wire shelf creates an elevated storage level inside compatible commercial freezer cabinets. Its open-wire construction allows air to circulate around stored products, while the shelf layout keeps items separated within…

Site icon
3978270 Delfield Refrigerator Shelf

The Delfield 3978270 refrigerator shelf provides a storage surface for arranging items inside compatible commercial refrigeration equipment. Its position within the cabinet allows products to be separated across available storage levels, according…

Site icon
027221 Waring/Qualheim Toaster Heating Element 337W 120V

The Waring 027221 toaster heating element converts electrical energy into heat to toast food in compatible commercial toaster equipment. Rated at 337 watts and 120 volts, this component must match the toaster’s electrical requirements and element…

Site icon
802299 True Shelf Support Knob

The True 802299 shelf support knob provides a mounting or support point for shelving within compatible refrigeration equipment. Its role in the shelf assembly makes correct placement and fit essential when maintaining the unit’s interior storage…

Site icon
2200707 Garland Electrode Nut 1/4" ID x 1/8 MPT

The Garland 2200707 Electrode Nut secures the electrode connection within a compatible range ignition assembly. Its 1/4-inch inside diameter and 1/8-inch MPT thread specification provide useful identification details when matching the fitting to…

Site icon
TT-34910 Alto-Shaam Thermostat Elanmanual Cook Pod

The Alto-Shaam TT-34910 thermostat is a temperature control component associated with the Elanmanual Cook Pod. It monitors temperature conditions and regulates heating operation according to the equipment’s control design. Correct thermostat…

Site icon
370164 Lincoln Convection Oven Heating Element

The Lincoln 370164 heating element generates heat for compatible commercial convection ovens operating at 230V. As electrical energy passes through the element, it produces heat that supports the oven’s cooking cycle. Correct voltage and part…

Site icon
Perlick C21398-1 Replacement Door Pan

The Perlick C21398-1 door pan measures 30-1/4 inches by 19-7/8 inches and forms part of the door assembly on compatible commercial refrigeration equipment. Its dimensions provide a reference when identifying the correct panel for a specific unit…

Site icon
KVL0020A Unox Pressure Reducing Valve/Regulator

The Unox KVL0020A pressure reducing valve regulates incoming water pressure within compatible commercial cooking equipment. This component helps reduce supply pressure to the level required by the connected system, supporting controlled flow…

Site icon
50630601 Victory Refrigerator Door Gasket

The Victory 50630601 Refrigerator Door Gasket forms a sealing edge around the door of compatible commercial refrigeration equipment. Measuring 25-1/4 inches by 28 inches, it creates a barrier between the closed door and cabinet frame to limit…

Site icon
06001397 Glastender 25 Minute Defrost Timer,

The Glastender 06001397 automatic defrost timer controls scheduled defrost cycles in compatible commercial refrigeration equipment. Rated for 15A and 120V, this component switches the designated circuit according to its timer settings, coordinating…

Site icon
Jade Range 4816900000 Fan Blade for Air Circulation

The Jade Range 4816900000 fan blade is a 6-inch component used to move air within compatible commercial equipment. As the blade rotates with its connected motor, it supports airflow through the designated assembly. Correct blade dimensions and…

Site icon
4540-004-33-76 Jackson Heater Dishstar Low-Temperature Wash

The Jackson 4540-004-33-76 Wash Heater supplies heat to the wash water in compatible Dishstar low-temperature commercial dishwashing equipment. Rated at 1.5kW, this component supports the machine’s specified wash-temperature requirements during…

Site icon
CK1028002 Garland 2-1/8" Burner Air Shutter W/Screw & Washer

The Garland CK1028002 Burner Air Shutter regulates airflow entering the burner assembly in compatible commercial cooking equipment. Measuring 2-1/8 inches, this component includes a screw and washer for its specified mounting arrangement. The…