Sachiya Steel International holds expertise in offering wide array of SMO 254 Threaded Forged Fittings that are acclaimed for sturdy construction and are performance oriented. Coupled with Nickel and Copper this gives SMO 254 Forged Threaded Elbow (UNS S31254) a good resistance to pitting and crevice corrosion, especially in environments containing halide ions, e.g. chloride, bromide and...

Sachiya Steel International holds expertise in offering our clients an exceptional array of Alloy 20 Threaded Forged Fittings that is acclaimed for high quality and wide applications. Due to its nickel, chromium, molybdenum and copper levels, our Alloy 20 Forged Threaded Elbow(UNS N08020) is ideal for use in corrosive environments. These Alloy 20 Forged Threaded Tee, which also includes copper...

Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 904L Threaded Forged Fittings, which have excellent resistance to warm seawater and chloride attack. The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 - 8 chromium - nickel steels and its susceptibility to carbide precipitation during welding...

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 446 Threaded Forged Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling. Because of its high - hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit...

Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Threaded Forged Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness. Pre hardened and tempered Stainless Steel 410...

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 446 Threaded Forged Fittings, which is commonly used for various fasteners and pins that require strength and resistance to galling. Because of its high - hardness capability, Stainless Steel 446 Forged Threaded Elbow is seldom welded, because the additions of 4 % silicon and 8 % manganese inhibit...

Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron. After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars. Stainless Steel 310S Forged Threaded Tee made in fine quality uses...

Sachiya Steel International is one of the well-established Manufacture & Exporter of high quality Stainless Steel 310H Threaded Forged Fittings, which is silver - coloured metal that conducts heat and electricity well. Stainless Steel 310H Forged Threaded Elbow is too reactive to exist alone so it only occurs naturally in the earth's crust as iron ores, such as hematite, magnetite, and...

Sachiya Steel International is among renowned Manufacture And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless...

Sachiya Steel International is one of the well-known Manufacture and exporter for high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron. After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars. Stainless Steel 310S Forged Threaded Tee made in fine quality uses...

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices. The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures. Stainless Steel 304L Threaded Forged...

Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 304 Forged Threaded Fittings, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. Components of Stainless Steel 304 Forged Threaded Elbow using the combination of excellent corrosion...

Sachiya Steel International is a manufacturer and Exporter of first-rate Buttweld 180 Degree Pipe Bend. These 180 Degree bends are elbow pipe fittings that are widely used as a point of connection between two lengths of pipes to produce a change in the direction of flow in the pipe usually at 180 � (180 degree) angle. A pipe bending machine is a vital component for any project involving pipe...

Sachiya Steel International is a manufacturer and Exporter of Buttweld 10D Pipe Bends. The 10 bends are pipe fittings that have an extra-long curvature radius i.e. ten times the main drain bore diameter(D). A part of the pipe is formed or twisted in a loop. The width of the curve is determined in the centerline. The bent centerline measurement is 10 times the pipe segment's normal diameter...

Sachiya Steel International is an acknowledged manufacturer and supplier of Buttweld 4D Pipe Bends. A 4D bend is a bend where the curve length is four times the pipe diameter. It's a finer bent than a 1.5D bend, which looks like a regular right angle of 90 degrees, but it's a stronger bend than a 4D bend, which looks like a flat curve between two perpendicular parts. Such bends can be created...

We at Sachiya Steel International produce the best quality Buttweld 5D Pipe Bends. that are Pipe bends which act as structural pathways to allow material movements, such as water and fuel transfer. The 5D bend's "D" reflects the pipe's outside diameter, as expressed in centimeters. A bend radius is compounded by this outer diameter to figure out what kind of a bend to create. For examples, a...

Sachiya Steel International is an industry-leading manufacturer and supplier of 3D Bend Pipe twists. 3D bends are pipe twists, the width of which is three times that of the outer thread. A wire can be twisted in multiple directions and angels. Nevertheless, the shape of an elbow varying from two degrees 90 degrees is some of the most normal and easy bends. Others are the U-bends which have a...

Sachiya Steel International leading manufacturer and supplier of 1.5D Bends. We produce these 1.5D seamless pipe bends using the finest quality resources, making sure that there elbow bends are suitable for applications in all desired conditions. Stainless Steel 1.5D Pipe Bend is the paragliding concept for metal shaping methods that are used to mold pipes or tubing indefinitely. One must...

Sachiya Steel International is one of the prominent Manufacture and Exporter for high quality Brass Buttweld Fittings, which is the most widely used stainless steel grade. Brass Elbow Butt Weld Pipe Fittings finds applications due to both excellent corrosion resistance and high strength. Brass Tee Butt Weld Pipe Fittings gives better guaranteed corrosion resistance, but for much of the...

Sachiya Steel International is a known Manufacture of Copper Buttweld Fittings, which is available in different sizes and shapes for our esteemed clients. Our organization is highly known among the customers for manufacturing, supplying and exporting a qualitative array of these Copper Elbow Butt Weld Pipe Fittings, which is being offered at market leading prices to our customers. Air...

Sachiya Steel International offers Cupro Nickel 70 Buttweld Fittings, which has some best features to offer such as optimum tensile strength, corrosion resistant, abrasion resistant and more. These Cu-Ni 70 / 30 Elbow Butt Weld Pipe Fittings (UNS C71500) is readily cold worked, fabricated and welded without any special material considerations. Cupro Nickel 70 / 30 Tee Butt Weld Pipe Fittings...

In order to fulfill the ever changing demands of our clients, Sachiya Steel International has been engaged in offering a quality range of Cupro Nickel 90 Buttweld Fittings. In addition, these Cu-Ni 90 / 10 Elbow Butt Weld Pipe Fittings (UNS C70600) offers excellent corrosion resistance, especially in marine salt water environments. Cupro Nickel 90 / 10 Tee Butt Weld Pipe Fittings are often...

Sachiya Steel International offers a wide range of Titanium Gr 2 Buttweld Fittings, which are manufactured keeping in mind the variegated requirements of our esteemed customers. In addition to this, we offer these Titanium grade 2 Pipe Elbow in a spectrum of sizes and dimensions at reasonable rates. We also offer these products in different grades such as Titanium Grade 2 Butt Weld Pipe...

Steel International offers a wide range of Monel Alloy 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel - copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 Pipe Elbow...

Sachiya Steel International offers Monel Alloy K500 Buttweld Fittings, which has some excellent features such as dimensionally stable, durable, rust - proof and more. Monel K500 Elbow Pipe Fittings (UNS N05500) is an age - harden able version gic the nickel - copper Monel alloy 400. In fact, Monel K-500 Reducer Pipe Fittings combines the excellent corrosion resistance characteristic of Monel...